Ortho Natures Color Change is an orthodontic resin to glue brackets that already incorporates the adhesive in the same formula, helping the professional and saving work time.
Ortho Natures was thought to revolutionize orthodontic adhesive, and that is why it is the only one that brings double traceability technology: Color change and fluorescent tracker, so the professional has a perfect visibility during the adhesion and after bracket removal.
Ortho Natures Color Change is compatible with every bracket available on market, metallic, ceramic, polycarbonate and Safire.
How to use
Not only in the gel, but, in the package as well.
100% vedado contra luz
4g de resina
Mode of Use
Step 1 - APPLIANCE
Promote the dental surface cleansing with non-oily pastes. Abundantly wash with water;
STEP 2 – APPLIANCE
Perform a efficient isolation in the operatory field and dry with air jets free of oil and humidity. The use of a retractor is recommended for a better visualization.;
STEP 3 – APPLIANCE
Make the acid conditioning using a phosphoric acid 37% (Power Etching – BM4) from 20 to 30 seconds;
STEP 4 – APPLIANCE
Wash with enough water and dry with air jets free of oil and humidity. Any contamination as saliva or residues may affect the adhesive penetration in the micro porosities formed by acid conditioning. If occurs, perform the conditioning again.
STEP 5 – APPLIANCE
Apply with the syringe one layer of the adhesive Ortho Natures Color Change in the bracket base;
STEP 6 – APPLIANCE
Immediately put the bracket with the adhesive in the conditioned surface and adjust to the final position.
STEP 7 – APPLIANCE
Push the bracket against the tooth so a thin layer of adhesive is kept, approximately 0,5mm. Remove all adhesive excess with an exploratory probe before light curing;
STEP 8 – APPLIANCE
To every bracket type cluing, light cure the bracket edge for approximately 20 seconds and putting the curing light tip closer to the adhesive. A minimum power of 400 mW/ cm2 is indicated. Equipment with inferior power need a bigger cure time. Use protection glasses during the light curing;
STEP 9 – APPLIANCE
After the gluing, the arch can be placed;
STEP 10 – APPLIANCE
When the treatment is finished, remove the brackets with specific instruments. The adhesive residue in the dental surface must be removed with low rotation burs or thin granulation discs. Care must be taken do the enamel will not be damaged.
STEP 11 – APPLIANCE
Polish the teeth with felt discs or polishing paste with extra fine granulation.
Package with 1 syringe